HomeBathroomHow To Regrout Your Bathroom (Step By Step Guide)

How To Regrout Your Bathroom (Step By Step Guide)

We recently covered how to open the bathroom lock and in today’s article, we will show our cherished readers how they can regrout their bathroom tiles easily. 

The moisture from your shower stains the grout on your bathroom walls, making them look grubby and unpleasant.

You will also notice that as time goes on, the grout in between the bathroom wall tiles begins to lose its color. 

You will see broken lines running all over the bathroom walls, and the problem typically becomes worse at places where water collects. 

The first thing that most people do is clean the grout. Scrubbing the grout on the walls with the right cleaning products may correct the wrong color of the grout. 

However, you may see that the damage is too extensive for some cleaning products to take care of.

If the grout is already wearing out, then it means that you need to remove it and replace it with a new grout.

The minor stains and the mold can be removed using a grout cleaner with detergents and biological agents. However, if the grout has become dirty, you will need to remove it and put in new grout. 

We will take a look at that step by step in today’s article. This article will show you how to regrout your bathroom wall easily without much stress. 

You will be able to remove the unpleasant-looking grout and replace it with new grout that you can get from most tile shops in your area. 

You can regrout your bathroom walls easily with the grout tool, which is not expensive at all. You need to follow a few steps to regrout your bathroom walls. 

Below are the steps you can take to regrout your bathroom. Getting rid of the old grout is not easy, but you can make it so. The work will cause a lot of debris in the toilet, and you will need to clean that up after the whole job is done. 

There will also be dust around the bathroom as you remove the grout. You should make sure to put on some old clothes for this work and glasses to protect your eyes from debris and dust. 

Essential Bathroom Grouting Tips

Before you proceed to grout your bathroom, here are some essential grout tips that you should know first. 

  1. Never mix more grout than you will use within 30 minutes. The grout will thicken and then become unstable when left sitting there. So always mix just the amount you will need to cover a particular area on the bathroom wall within 30 minutes. You can evaluate the wall and pinpoint precisely how much grout you need.
  2. Adding too much water to the grout is not advisable at all. This is because when you add too much water to the grout mix, you will not apply it to the wall, with the grout seeping out of the joints. Instead, you can add more grout powder to make the mix thick if the consistency is a bit too thin.
  3. You should always wear a glove to protect your hands when using the grout. Your hands need to be watched while working with grout, so always make sure to wear gloves when you do so. Never work with grout without gloves on your hands.
  4. Do not use any harsh cleaning materials until the grout has been set entirely on the bathroom wall. 
Also Read:  5 Best Touchless Bathroom Faucets With Temperature Control

Tools Needed For Removing The Grout

Before you start removing the grout, you will need to get your hands on the appropriate tools to make the work easier for you. 

Having the tools ready before you begin will save you a lot of time and help you avoid frustration while you work. 

Below are the tools you will need to carry out the grout removal project. Make sure to get each one of them so that you can do the work smoothly.

  • Safety glasses
  • A sponge
  • Grout float
  • Rubber gloves
  • Grout removal kit
  • Grout
  • Grout sealer
  • Towel
  • Cloth
  • Grout spreader
  • Grout shaper

As you can see, these are not heavy tools, and they are pretty easy to get. You should avoid making any last-minute trips to the hardware or tile shop by having all the tools ready. 

You can also purchase the grout pre-mixed, or you can decide to buy the powder so you can mix it yourself.

  • The Grout Removal Tool

This grout removal kit comes with a grinding guide, and grout saw to help you quickly get rid of old grout on your bathroom walls. 

The grout saw in the kit allows you to clean along the edges of the tiles where the grinder cannot reach and has been designed to fit a Dremel tool. 

Step By Step Guide On Regrouting Your Bathroom 

Step 1 – Removing The Old Grout

Attach the grout removal unit with the depth set at 1/4. Now run the tool guides between the tiles and then grind through the old grout on the wall. 

Also Read:  How To Clean A Smelly Drain In Bathroom Sink

It usually takes long hours whenever you decide to renew the old grout on your bathroom walls.

You will first have to hack away the old worn-out grout on the walls with the help of a tiny saw.

You can make the work more accessible when you buy a grout removal kit which is not all that expensive. 

This kit can be attached to a Dremel tool and comes with a high-speed carbide bit that chews the old grout on the bathroom walls away quickly. 

There is a kit guide that prevents you from chipping away the edges of the tile so that you do not spoil the tile in the process. You can also use a grout rake to remove the old grout.

Before you start working on regrouting your tile, you need to make sure that you have put on some safety clothing like glasses to protect your eyes and gloves for your hand. 

Use the grout saw to scrape out the edges and corners, and this will also clean out the joints in the process.

Step 2 – Applying The New Grout

Now, push the grout diagonally across the wall into the vacant joints with a grout float. 

Afterward, it would help if you vacuumed up any dust or debris left after the grinding process. Take a big part of the current grout to any place where you can find a match. 

This will mostly be a home center or a tile shop. You should also purchase a latex additive that you will mix with the new grout to become more durable. 

It would help if you mixed the grout slightly thicker than peanut butter. After mixing the grout, you then apply it to the bathroom wall.

You take a small amount of the grout, and with your towels, you press it against the bathroom wall surface. 

Now, use the grout spreader to spread the grout in long diagonal strokes, working it into the tile joints.

Ensure that all the joints get grouted, and you should try to work as fast as you can because the grout hardens quicker than you may think. 

Also Read:  How To Get Rid Of Bathroom Mold On Ceiling

Step 3 – Removing The Excess Grout

After applying the new grout to the bathroom, you will now have to wipe off the excess grout on the wall. You can do this by using a damp sponge. 

It would help if you rinsed the sponge often while using it. After that, allow the grout to sit for about 20 minutes.

After which, the film will develop on it, and then you clean it with the damp sponge. 

The grout should be left for about a week when you are done. While you use the damp sponge to get rid of any excess grout, be careful not to drag any of the grout from the tiles. After a week has passed, seal the grout with a grout sealer. 

Step 4- Finishing The Joints Off With A grout Shaper

After the grout has hardened slightly, you can now use a grout shaper to finish the joints and present neat work. 

All you have to do is pull the grout-shaping tool over the joints in one movement. If you spot any gaps in the joints, apply a little more grout to that gap with your finger. 

After that, use the damp sponge to remove the excess grout that will be left.

Step 5 – Polishing The Tile With A Soft Cloth

After the work is done, you will notice a powdery film on the bathroom wall tiles. You can use a soft cloth to quickly clean the tiles, leaving the tiles looking polished and neat. 


So these are the steps in replacing the grout in your bathroom. You usually have to replace the grout after seeing that the damage is beyond your control. 

With the right tools at your disposal, you can get rid of the old grout and replace it with a new one by following the steps in this article. 

Even if you have not done this before, this article will make you get the job done like a professional.

Remember to always have protective clothing on before getting rid of the old grout. 

Always have your glasses, gloves, and old clothing on. 

The bathroom will also have to be cleaned after the work is done due to the amount of debris and dust made while you work.

So you have now been equipped with some knowledge on how to replace the old grout in your bathroom.

I am sure that you can do an excellent job on the bathroom walls now. Do not forget to find similar articles like this on this website. 

Thanks for reading at HouseTuts.com, scroll down to read the next related article, did I miss something you were looking for? Don’t forget to leave a feedback on the comment section, you can also share to help others. Connect with us on FacebookTwitter and Instagram

Christopher Nolanhttps://housetuts.com
Born in the USA, Christopher Nolan, is a home improvement expert, author, and blogger. He has over 10 years of experience in the home improvement industry, working in interior design, exterior, and marketing.

What do you think?

Send Me New Article By Email

Get the Latest DIY tutorials, Bathroom tutorials, Kitchen, Home improvement tutorials and many more straight in your inbox