How To Repair A Leaking Moen Kitchen Faucet
Moen is one of the most reputable brands of cartridge faucets.
Since the founder, Al Moen, founded this company in 1956, Moen has become a household name in faucet production.
Because of their distinctive design, Moen kitchen faucet repair is made easier because you won’t have to waste time looking for numerous faucet models. It’s a cartridge faucet if it’s a Moen.
That’s not to say Moen doesn’t have a dizzying array of faucet models available. It most certainly does.
It is important to know what kind of faucet you have so that you can get the appropriate replacement components when a Moen kitchen faucet leaks.
Some of the fixes frequently entail replacing the Moen kitchen faucet cartridge and the rubber parts that go with it.
You can always find the specific part of a Moen kitchen faucet on their main website.
If your Moen kitchen faucet is leaking, you should try to fix it ASAP because the leakage issue may escalate into something costly later.
In this article, the various steps to fix your leaking Moen kitchen faucet are discussed. Let’s take a walk.
Steps To Repair Leaking Moen Kitchen Faucet (Single Handle) And Moen Faucet Leaking From The Base
Tools Needed Before Getting Started
- Soft Brush
- Screwdriver
- Allen Wrench
- Flathead screwdriver
- Adjustable wrench pliers
- New Washer
- To reduce water pressure, shut off the water valves under the sink and open the faucet
- With a flat-head screwdriver, find the screw cap covering the faucet handle, and pull it out to reveal the set screw holding the handle in place. Typically, the Moen logo is on the hat.
- Pull off the handle after loosening the set screw with a 1/8-inch Allen wrench. If it doesn’t come off easily, give the scale holding it on a couple of mild hits with a hammer to break it away.
- Use tongue and groove pliers to unscrew the retaining nut holding the cartridge in place. You may also use a retention pin to hold the cartridge in place. Use a flat-head screwdriver to solve this problem while being careful not to drop it down the sink.
- If your faucet is old, the cartridge may be difficult to get out. If that’s the case, you’ll need to rent or buy a cartridge puller. Otherwise, grab the valve stem with a pair of pliers and wiggle it side-to-side until it pops out.
b. Check the handle to see damaged parts and clean or replace the washer
The function of a washer is to close or open the water flow in the faucet.
As time goes on, mineral deposits can accumulate in your washer. When the accumulation of minerals becomes too great, your washer won’t function properly and your faucet may start to leak.
Mineral buildup can cause a gap to form around the faucet, which means the washer won’t be able to shut off the water even when the handle is in the “off” position.
You need to clean the washer in this scenario. Vinegar is the finest solution for removing mineral buildup.
Mix the same amount of water and vinegar. Now put the washer into the mixture for a few hours.
It will remove all buildup from the washer and make it function properly again.
However, if the washer is damaged, cleaning it up won’t solve the issue. You will need to purchase a new Moen kitchen faucet part.
Once you’ve completed the repairs on the washer, put all the pieces back in their rightful places and give the faucet a test run to make sure everything is functioning correctly.
Fixing a Leaky Moen Double Handle Kitchen Faucet
- Tools Needed
- A screwdriver (preferably Philips).
- A flathead screwdriver
- A pair of pliers
- A new washer (the same size as the old one)
- Firstly, shut off the water supply to the tap.
- Use a Philips screwdriver to remove the handle.
- Remove the cap from the valve stem with a flathead screwdriver.
- The valve stem would be retained with a clip. The retaining clip can be eliminated with the use of pliers.
- Now that the valve stem is unlocked, you can remove it from the faucet body.
- Check out the washer’s state of repair. Replace it if it’s worn out or damaged.
- Gently take out the old washer and fit a brand-new washer onto the valve stem. All parts should be reattached, and everything should be securely tightened.
What To Do If Moen Faucet Is Leaking From Spout
If your Moen faucet is leaking water from the spout, it may be caused by a clogged aerator. To fix this issue, simply clean the aerator, and the leaking should stop.
In this case, you need to clean the aerator by putting it in a mixture of water and vinegar for a few hours.
Once you’re finished, remove the aerator. If there are any clogged holes, use a toothpick or needle to clear them out. Once it’s all clean, put it back into the spout.
Conclusion
You can save a few bucks by trying to fix your faulty Moen kitchen faucets. A guide to how you may fix it yourself has been discussed in this article.
If you want to know the average faucet flow rate, then this article is the right one for you. This Read more
How long does a kitchen remodel take? I believe you have asked yourself this question before when it was time Read more
You may have had your kitchen faucet drip a few times before, and it got you wondering what the cause Read more
Fixing kitchen cabinet hinges is not something you can do simply like most other things in the kitchen. This is Read more
When you have leaky pipes, failure of the garbage disposal system, and humidity in your kitchen, they can damage your Read more
One of the most used items in our home is probably the faucet in the kitchen, and you use it Read more
How much does it cost to replace your kitchen cabinet doors? this is a question that many of our readers Read more
The prevalence of cockroaches in the kitchen can be attributed to several factors. The kitchen, a source of food, water, Read more
So what causes low water pressure in the kitchen sink? this question has been asked a lot of times on Read more
What does oven cleaner do to countertops? This article is a full guide on how to properly clean your kitchen Read more
The countertop is one of the most notable additions to a home. There are several types that one can use Read more